SHOE & BOOT

A. Bologna B. Floater Upper Leather C. Calfskins (Italian Calf Leather) D. Shrunken Bull Shoulders E. Pebbled Elkgrain F. Bologna Tongue G. Monte Carlo

BOLOGNA

Bologna is a sturdy, rugged work shoe and boot leather. This leather has a light pigment finish, an oily topcoat and a light hair cell grain to maximize cutting values.
Thickness: 5-5.5 oz. (2.0-2.2 mm)
Size: approx. 22 sq. ft.
Colors: Black, Walnut, Red Dog (LEA B2C)

FLOATER UPPER LEATHER

Floater is a full grain shoe and boot leather with the large pebble embossing, giving excellent cutting value. This is a thicker leather that produces quality footwear.
Thickness: 4-4.5 oz. (1.6-1.8 mm)
Size: approx. 22 sq. ft.
Colour: Black (LEA F2A)

CALFSKINS (ITALIAN CALF LEATHER)

Calfskins are a very good full grain leather ideal for use in fine shoemaking and custom footwear. The leather grain is very tight with a good tensile strength. The selection is excellent for top quality footwear.
Premium (LEA C2B), Standard (LEA C1E)
Thickness: 2.5-3 oz. (1.0-1.2 mm)
Approx. 16 sq. ft.
Colors: Black, Brown 

SHRUNKEN BULL SHOULDERS

This is a genuine shrunken grain leather where the fat wrinkles and the natural pebble of the bull hides are emphasized. Each hide has a unique pattern. Shrunken Bull has a high tensile strength for toe lasting and the pebble pattern will not pull out. This is a tough leather and is excellent for western boots and personal leather goods.
Thickness: 5-5.5 oz. (2.0-2.2 mm)
Approx. 9-12 sq. ft.
Colors: Black and various shades of Tan and Brown (LEA B5A)

PEBBLED ELK GRAIN

The Pebbled Elkgrain is a cowhide with the elk grain embossing. This leather is soft, pliable and excellent for ladies shoes and boots. The finish is pigmented with a water topcoat.
Thickness: 2.5-3 oz. (1.0-1.2 mm).
Colors: Black, Brown (LEA S1F)

BOLOGNA TONGUE

Bologna Tongue is a lightweight leather ideally suited for shoe tongues, collars and boot shafts. The leather has a very light oil top and is quite soft and pliable.
Thickness: 2.5-3 oz. (1.0-1.2 mm)
Colors: Black, Walnut (LEA B2B)

MONTE CARLO

Monte Carlo is a lightweight shoe leather, specially tanned for ladies shoes. It has a pigment finish with a water topcoat and a hair cell grain. The temper is mellow, allowing this leather to also be used for shoe tongues, collars and boot shafts.
Thickness: 2.5-3 oz. (1.0-1.2 mm)
Color: Black (LEA M1E)

ASSORTED SHOE LEATHER

We have an assortment of kid, cowhide and calf hides in various colors and thickness. These leathers are ideally suited for footwear manufacturing and repair of shoes, work boots and western footwear.
Thickness: 2.5-6 oz. (1.0-2.4 mm)
Mirage (LEA T1A), Kid (LEA K1A), Kip (see Lining), Patent (LEA P3A), etc.

PATCHING LEATHER

Patching leather is an economical solution for small shoe repairs. Comes in assorted thickness and colors. Sold by the pound. (LEA S1A)